=0;i--) { if(saveids[i]==fid && hasid) continue; else { if(saveids[i]==fid && !hasid) hasid = true; saveid += (saveid=='' ? saveids[i] : ','+saveids[i]); j++; if(j==10 && hasid) break; if(j==9 && !hasid) break; } } if(hasid) { alert('您剛才已表决過了喔!'); return false;} else saveid += ','+fid; SetCookie('badgoodid',saveid,1); } else { SetCookie('badgoodid',fid,1); } myajax = new DedeAjax(taget_obj,false,false,'','',''); myajax.SendGet2("/plus/feedback.php?aid="+fid+"&action="+ftype+"&fid="+fid); } function postDigg(ftype,aid) { var taget_obj = document.getElementById('newdigg'); var saveid = GetCookie('diggid'); if(saveid != null) { var saveids = saveid.split(','); var hasid = false; saveid = ''; j = 1; for(i=saveids.length-1;i>=0;i--) { if(saveids[i]==aid && hasid) continue; else { if(saveids[i]==aid && !hasid) hasid = true; saveid += (saveid=='' ? saveids[i] : ','+saveids[i]); j++; if(j==20 && hasid) break; if(j==19 && !hasid) break; } } if(hasid) { alert("您已經頂過該帖,請不要重复頂帖 !"); return; } else saveid += ','+aid; SetCookie('diggid',saveid,1); } else { SetCookie('diggid',aid,1); } myajax = new DedeAjax(taget_obj,false,false,'','',''); var url = "/plus/digg_ajax.php?action="+ftype+"&id="+aid; myajax.SendGet2(url); } function getDigg(aid) { var taget_obj = document.getElementById('newdigg'); myajax = new DedeAjax(taget_obj,false,false,'','',''); myajax.SendGet2("/plus/digg_ajax.php?id="+aid); DedeXHTTP = null; } -->
人人IT網

人人IT網

當前位置: 主頁 > 操作系統 > OS >

配置OSPF虛鏈路實驗出現問題,請大俠們指教

時間:2016-11-02 03:30來源:Internet 作者:Internet 點擊:
原想虛鏈路命令挺簡單,沒想到弄了半天,就是成功不了啊。設備全是cisoco 3600 拓撲圖如下: 650) this.width=650;" onclick='window.open("http:/
原想虛鏈路命令挺簡單,沒想到弄了半天,就是成功不了啊。設備全是cisoco 3600
拓撲圖如下:
http://test2016.blog.51cto.com/
R0:interface Loopback0
 ip address 1.0.0.1 255.255.255.0
!
interface Serial0/0
 ip address 192.168.1.2 255.255.255.0
 no fair-queue
 serial restart-delay 0
 clock rate 64000
!
interface Serial0/1
 ip address 192.168.3.1 255.255.255.0
 serial restart-delay 0
 clock rate 64000
router ospf 10
 router-id 1.0.0.1
 log-adjacency-changes
 area 2 virtual-link 3.3.3.3
 network 192.168.1.0 0.0.0.255 area 0
 network 192.168.3.0 0.0.0.255 area 1
 
R1:
interface Loopback0
 ip address 1.1.1.1 255.255.255.0
 ip ospf network point-to-point
!
interface Serial0/0
 ip address 192.168.2.2 255.255.255.0
 no fair-queue
 serial restart-delay 0
 clock rate 64000
router ospf 10
 log-adjacency-changes
 network 192.168.2.0 0.0.0.255 area 0
 
R2:
interface Loopback0
 ip address 2.2.2.2 255.255.255.0
!
interface Serial0/0
 ip address 192.168.1.1 255.255.255.0
 serial restart-delay 0
!
interface Serial0/1
 ip address 192.168.2.1 255.255.255.0
 serial restart-delay 0
router ospf 10
 log-adjacency-changes
 network 192.168.1.0 0.0.0.255 area 0
 network 192.168.2.0 0.0.0.255 area 0
 
R3:
interface Loopback0
 ip address 3.3.3.3 255.255.255.0
!
interface Serial0/0
 ip address 192.168.3.2 255.255.255.0
 no fair-queue
 serial restart-delay 0
!
interface Serial0/1
 ip address 192.168.4.1 255.255.255.0
 serial restart-delay 0
router ospf 10
 router-id 3.3.3.3
 log-adjacency-changes
 area 2 virtual-link 1.0.0.1
 network 3.3.3.0 0.0.0.255 area 2
 network 192.168.3.0 0.0.0.255 area 1
 network 192.168.4.0 0.0.0.255 area 2
 
在配置虛鏈路之前,各網段是正常的,都能通,鄰居建立,路由信息都沒問題。剛開始以为是沒有在dce上設時钟頻率的原因,設置後,仍有問題。
請高手們指教,配置上哪有問題!

From:51CTO
頂一下
(0)
0%
踩一下
(0)
0%
------分隔線----------------------------
發表評論
請自覺遵守互聯網相關的政策法規,嚴禁發布色情、暴力、反動的言論。
評價:
表情:
驗證碼:點擊我更換圖片
欄目列表
推薦內容